Glossary

The words, defined once.

Most of these arrive without introduction, usually inside a questionnaire from a customer who assumes you already know them. Here is what each one means, in a sentence, with a link to the page that takes it slowly if you want more than a sentence.

The short version

This glossary defines the terms used across Green Story’s learning pages (functional unit, system boundary, cradle-to-gate and cradle-to-grave, primary data, emission factors, supply chain tiers, PEF, EPD, PCF and the rest), with each entry linking to the page that explains it in full.

A to Z

Every term these pages use.

Each one links to the page that explains it properly, which is also the page that defines it, so a definition here and a definition there can never disagree.

Absolute target
Total emissions fall by a set percentage. Unambiguous, and unforgiving of growth.
Targets
Activity data
How much of something happened: energy drawn, mass processed, distance moved. The measured half of the arithmetic.
Data quality
Allocation
How impact is divided when one process yields more than one output, fibre and seed from the same ginning, for instance. The choice is declared, because it moves the answer.
Product LCA
Assurance
Independent checking of reported figures, at limited or reasonable level. A different exercise from measurement, and performed by someone who did not do the measuring.
Background process
A process nobody collects per order: grid electricity, freight, bulk chemistry. What life-cycle databases exist to cover.
Data quality
Base year
The reference year progress is measured from. Its data quality sets a ceiling on every later claim about progress.
Targets
Base-year recalculation
Restating the baseline after a material change: acquisition, divestment, method change. Needs a written policy, or it becomes a way to make a target easier.
Targets
Chain of custody
Evidence that a specific material passed through a specific set of hands: the documentary spine under an origin or content claim.
Traceability
Characterisation factor
The multiplier that converts a substance into an impact category: how much a kilogram of methane counts towards climate change, for instance.
CIRPASS-2
The EU programme working out how passports interoperate across sectors, so that a passport is readable outside the system that issued it.
DPP
CO₂e
Carbon dioxide equivalent: different greenhouse gases expressed on one scale by their warming effect, so they can be added together.
Comparative claim
Any claim of better, lower or reduced. Needs a stated baseline, an equivalent functional unit and a like-for-like method.
Claims
Coût Environnemental
France’s environmental cost display for textiles: a single score in impact points, shown to shoppers, computed on the state’s published method.
Ecoscore
Cradle to gate
Raw material through to the point the finished product leaves the last factory. The working boundary for supplier data and Scope 3.
Product LCA
Cradle to grave
Cradle to gate plus distribution, use and end of life. The boundary consumer-facing claims and display schemes require.
Product LCA
CSRD
The EU’s Corporate Sustainability Reporting Directive: company-level sustainability reporting, audited, and a separate obligation from any product-level scheme.
Dataset version
Which release of a factor source was used. Without it, two figures computed years apart cannot be known to be comparable.
Data quality
Decarbonisation pathway
The year-by-year trajectory between the base year and the target, against which progress is actually tracked.
Targets
Delegated act
The instrument that fills in a framework regulation’s detail for one product group. It is where the textile passport’s actual field list is being settled.
DPP
Digital Product Passport
A digital record attached to a physical item, reached by a code on the product, carrying what it is, who made it and what it cost the environment.
DPP
Ecobalyse
The French state’s published calculation method and system for the environmental cost. Open, inspectable, and the thing scores are filed into.
Ecoscore
Emission factor
The impact per unit of an activity: per kilowatt-hour, per kilogram, per tonne-kilometre. The multiplier that turns activity data into a footprint.
Data quality
Environmental claim
Any statement implying a product or company is better for the environment. Broader than most teams assume: it includes imagery and implication, not only text.
Claims
EPD
Environmental Product Declaration: a published, independently verified life-cycle report for a product, produced to a category rule so that two declarations can be compared.
ESPR
The EU’s Ecodesign for Sustainable Products Regulation: the framework that creates the passport requirement and sets product rules group by group.
DPP
FLAG
Forest, Land and Agriculture: the target-setting guidance for emissions and removals from land, which is where natural fibres such as cotton and wool are accounted for.
Functional unit
The job the product does, stated precisely enough to compare: quantity, quality, duration and market. Every figure in an assessment is divided by it.
Product LCA
Generic claim
An environmental claim with no specified scope or evidence, such as “eco-friendly”, “green”. Banned in the EU where excellence cannot be demonstrated.
Claims
GHG Protocol
The accounting standard that defines the three scopes and the fifteen Scope 3 categories.
Carbon accounting
Graded gap
A missing input recorded and ranked critical, important or optional, rather than defaulted and presented as collected.
Traceability
Greenwashing
A claim that conveys more environmental benefit than the evidence supports. Usually a scope mismatch rather than an invention.
Claims
Greige
Fabric as it comes off the loom or knitting machine, before dyeing and finishing. The point at which most of the remaining impact has yet to be spent.
GS1
The identification and data standards body behind barcodes. Passports built to GS1 identifiers can be read by systems that were never told about your brand.
DPP
Higg FEM
The Facility Environmental Module: a standardised facility-level environmental assessment, verified by approved bodies. Green Story is a Cascale-approved verifier body for it.
Impact category
A dimension of environmental harm: climate change, water use, eutrophication, land use. Reporting one is legitimate; implying it is all of them is not.
Product LCA
Impact points
The unit the French score is expressed in. A compression of many impact categories into one figure, where lower is better.
Ecoscore
Insetting
Funding a reduction inside your own supply chain, which can count against your own footprint, as distinct from offsetting, which cannot.
Intensity target
Emissions per unit of output or revenue. Accommodates growth, and permits total emissions to rise while the target is met.
Targets
LCIA
Life Cycle Impact Assessment: the step that converts an inventory of emissions and resource use into impact categories such as climate change or water scarcity.
Measured share
The proportion of a result that came from primary data. The single most useful quality signal on any footprint, and the one to watch over time.
Data quality
Near-term target
The decade-scale commitment where the operational reductions actually happen.
Targets
Net-zero target
A mid-century commitment requiring deep absolute cuts before any residual emissions are neutralised.
Targets
Offsetting
Funding a reduction or removal outside your value chain. It does not reduce your own footprint, and saying what you funded is a different claim from saying what it cancels.
PCF
Product carbon footprint: an assessment reporting climate impact alone, in CO₂ equivalent. A full LCA covers water, land and other impact categories as well.
Product LCA
PCR
Product Category Rules: the agreed recipe for assessing one product family, so that two assessments of similar products measure the same things the same way.
PEF
The EU’s Product Environmental Footprint method. Prescribes categories, datasets and product rules so that two assessments can be compared.
Ecoscore
Placing on the market
The act that triggers the obligation. It catches manufacturers, importers and in several configurations retailers, which is how a non-EU brand ends up in scope.
DPP
Primary data
A value measured in your own chain for your own order (a meter reading, a utility invoice, a production record) rather than taken from a published average.
Product LCA
Purchased goods and services
Scope 3 category 1: what you bought to make your product. In fashion it typically outweighs the other fourteen categories together.
Carbon accounting
Restatement
Republishing a figure that has changed, with the previous version retained, rather than silently overwriting it.
Data quality
Science-based target
A reduction commitment derived from what climate science requires and validated against a methodology, rather than self-declared.
Targets
Scope 1
Direct emissions from sources a company owns or controls: its own boilers, vehicles and refrigerants.
Carbon accounting
Scope 2
Emissions from the energy a company buys. Reported location-based on the local grid and market-based on what was contracted for.
Carbon accounting
Scope 3
All other value-chain emissions, in fifteen categories. For an apparel brand, around 90% of the total.
Carbon accounting
Secondary data
A published figure for a process like yours, from a database or study. Legitimate for background processes, and a problem where it stands in for what differentiates your product.
Data quality
Single score
Any scheme that reduces a full life cycle to one number. Legible to shoppers, and lossy by construction, which is why the footprint under it has to stay reachable.
Ecoscore
Spend-based estimate
A footprint derived by multiplying supplier spend by an industry factor. Responds to prices rather than to production.
Carbon accounting
Substantiation
Having the evidence, the method and the verification behind a claim before it is published, rather than assembling them if challenged.
Claims
System boundary
Which life-cycle stages the assessment includes. Two figures with different boundaries are not comparable, however carefully each was made.
Product LCA
Tier 1
The facility that assembles the finished product: cut, make, trim. The one a brand usually contracts with directly.
Traceability
Tier 2
Fabric production: knitting or weaving, plus the dyeing and finishing that carry most of a garment’s energy and water.
Traceability
Tier 3
Yarn and fibre processing: spinning, ginning, and the steps that turn raw material into something spinnable.
Traceability
Tier 4
The raw material itself: farm, forest, recycler or polymer plant. Where origin claims are made and hardest to evidence.
Traceability
Traced chain
A chain of links per order, each confirmed by the partner who made it, as distinct from a centrally asserted supplier list.
Traceability
If you only wanted one answer

The shorter answers live on the FAQ.

Each of these is answered in a paragraph on the FAQ, which is where those answers live. This page is the long version of the same subject.

What a one-line definition can do

A sentence is enough to stop a word being a barrier, and it is not enough to use the thing properly. Where a term carries a real decision (which boundary, which basis, which tier), the definition here is a signpost and the explainer behind it is the answer. We would rather point you at a longer page than leave you confident on the strength of twenty words.

Bring us your own product

Watch the boundary get drawn on something you made.

Pick one garment and we will walk it end to end with you: the unit, the boundary, what we would need from your chain, and what the result would and would not let you say.