We start at the source, not the summary.
Which is what makes this the industry’s most defensible system of record for supply chain sustainability data: a global data network, and forensic data quality applied to everything that comes out of it.
- 01
Source data
Collected inside your supply chain, at the facility that did the work. Where a value cannot be collected, its rank is stated on the result.
The data hierarchy - 02
On-site validation
Our own people at the facility, checking the record against the floor across 35+ manufacturing countries. It ties each reported value to the work it describes.
How validation works - 03
Compliance output
Results native to the frameworks your auditor already reads, with the evidence, the factors and the reviewers assembled as the work happens.
How it stays true
A myriad of data points. One figure that fits your requirement.
A supply chain does not emit sustainability data. It emits invoices, batch records, recipes, certificates and machine hours, in a dozen languages and no particular order. The work is turning that into the one number a regulation, a retailer or a board paper is asking for, without losing what it was made of on the way.
Hover or tap any mark to read it.
28 input types, on one order
4 disciplines, in order
- RankedData hierarchyWhich of four source tiers this input came from, recorded on the result.→
- GradedCollectionWhat evidence arrived with it: metered, certified, attested, or missing and named.→
- SignedValidationFive gates and a person at the end of them, with the right to refuse.→
- MaintainedQuality assuranceVersioned, re-run when a factor moves, restated in the open.→
5 shapes, one dataset
- A product footprint
- A Scope 3 line
- A Digital Product Passport
- A French Ecoscore
- An audit evidence pack
A global data network, and forensic data quality.
Unrivalled reach
- Access to a unique global database of supply chains across 35+ major manufacturing countries.
- Deep strategic partnerships that facilitate trust-based data collection in key regions.
- 6,000+ proprietary data points for unique fibres and processes.
Forensic data quality
- Dissect impact at the material, energy and process level.
- Experts collect and validate data on site for maximum reliability and scalability.
- Methodology is native to global compliance frameworks, ensuring audit-ready results.
The disciplines behind every number.
Where the number came from, what it arrived with, who signed for it, and what keeps it true afterwards. Each has a page of its own.
Compliant with the standards your auditor already reads.
Being aligned to a framework after the fact is a translation exercise, and translations lose things. Ours are built in the frameworks from the start, which is why the same figure can be quoted in three of them without disagreeing with itself.
- ISO 14040/44
- Life-cycle assessment: principles, framework, requirements and guidelines
- ISO 14064
- Greenhouse gas inventories at organisation level
- ISO 14067
- Carbon footprint of products
- ISO 14065
- Requirements for bodies validating and verifying environmental information
- EU PEF
- Product Environmental Footprint: the method the European schemes are built on
- GHG Protocol
- Scope 1, 2 and 3 accounting and reporting
- Coût Environnemental
- The French environmental cost display, in impact points
- EPD
- The International EPD System
- GS1
- Identification and data standards, for passports that interoperate
- CIRPASS-2
- The EU Digital Product Passport programme
- UNECE
- Transparency and traceability for garment and footwear
- Higg FEMGreen Story itself
- A Cascale-approved verifier body for the Facility Environmental Module
- ISO 27001Green Story itself
- Information security management: certified, because your supply chain is commercially sensitive
Plugged into the bodies that write the rules
With 40+ partnerships and membership in global bodies and industry panels, we ensure you are plugged into the rapidly evolving world of sustainability.
It matters for two reasons. Deep partnerships in the major manufacturing clusters are what makes trust-based collection possible where a cold request would be ignored. And sitting on the panels means a method change reaches your account before it reaches your inbox as a deadline.
A decade of data precision
Textile-specific expertise that goes beyond assumptions, from pioneering textile LCAs to powering some of the world’s most sustainable fashion brands.
- The world’s first LCA on 3D weaving, which proved that on-demand production saves resources.
- A pioneering set of re-use LCAs, used in a listed retailer’s SEC filing and its resale market reports.
- The world’s first LCA on regenerative organic cotton farming in West Africa, which established the basis for at-scale sourcing by a major European retailer.
- The EU’s first LCA of multiple circular business models for a platform, which laid the basis for its circularity and resale strategy.
- India’s first LCA on textile-to-textile recycling, covering seven key facilities.
- The world’s first commercial rental LCA, giving a category-level analysis of rental impact.
Also: the quantitative basis for a full circular textiles ecosystem in the UK including advanced sorting facilities, a pioneering recycling LCA in Morocco that informed MENA investment, recycling studies for major US hubs, and a first-of-its-kind Indian roadmap for product carbon footprinting at scale.
A method published in the peer-reviewed literature.
Backed by a global team of PhD-level specialists in life-cycle assessment, policy and chemical assessment, with on-site collection and validation, so that every claim is audit-ready beyond simple assumptions.
A number built this way is defensible rather than certain: its source is named, its evidence is attached and its reviewer is on the record. An estimate is labelled as an estimate, and a figure is only signed when it can be defended in your audit. The first pass on a new supplier is usually the thinnest, and the measured share grows as the record is built inside the facility.
The questions your auditor is going to ask.
Answered at length, in the order they usually arrive. Anything not covered here is a good place to start the first call.
Where does a Green Story emission factor actually come from?
From a ranked hierarchy, and the rank travels with the result. Your own primary data first; then our proprietary datasets, built from primary collection inside supply chains; then established third-party life-cycle databases for background processes nobody collects per order; then peer-reviewed literature where nothing else exists yet. An analyst may only move down a tier when the tier above has been tried and cannot be obtained for that specific input.
How much of a typical footprint is actually measured rather than estimated?
It varies by chain and by season, and we state the split on the face of every result rather than in an appendix. No footprint is entirely measured. A model claiming 100% primary data is describing a supply chain nobody has. The figure worth watching is not whether estimation was used but whether the split is stated and whether it falls year on year.
What do you do when a supplier will not, or cannot, share data?
Three things, in this order. Partners who will never log in are recorded on their behalf, and the entry says that is what happened. Where the input still cannot be obtained, it is carried as a gap graded critical, important or optional, and our analyst works with the facility to close it. Until then the record shows it as a gap.
Who checks the data, and at what point?
Five gates. The platform objects first on units, ranges, duplicates and impossible yields. Then an analyst opens the document behind the value. Then, where the input matters or the evidence is thin, we verify at the facility, on site across 35+ manufacturing countries. Then an LCA specialist reviews boundary, allocation and factor choice, which is where sound inputs and a wrong model usually meet. Then it is signed, or refused.
Are you an accredited third-party verification body?
For the Higg Facility Environmental Module, we are a Cascale-approved verifier body. For everything else, no, and we will not offer our own review as a substitute where a scheme or a customer requires independent verification. What we do instead is make that audit short: the evidence, the factors, the versions and the reviewers are already assembled.
Which standards do your outputs conform to?
The life-cycle work follows ISO 14040/44 and ISO 14067 and the EU PEF method; corporate inventories follow the GHG Protocol and ISO 14064; passports are built to GS1 identification standards and the CIRPASS-2 programme; the French environmental cost display is computed on its own published method. The frame changes the presentation, never the underlying figure.
What happens to my published figures when a factor or a method changes?
We identify exactly which products and reports are affected and re-run those, rather than rebuilding everything. Results carry the method and dataset version they were computed under, so two figures are never silently incomparable, and the change is restated where the figure is published with the previous version retained. A correction nobody can see is indistinguishable from an error nobody caught.
Two of our suppliers report very different numbers for the same process. What then?
That is usually a real finding, not an error. Process technology, shade depth, machine age and grid mix genuinely move a dyeing or spinning figure several-fold, which is why we match a factor to the technology and the region rather than to the word on the invoice. Where the difference cannot be explained by the process, it goes to evidence review and, if it still stands, to a site visit.
Can our auditor see the evidence under a number?
Yes, and that is the point of the trail. Any published number traces back to the document it came from, the factor applied, the version of that factor, the reviewer and the date. Our team sits with your assurance provider and answers from the record rather than from memory.
Can we use our own emission factors?
Yes. Where you hold a verified factor of your own it is used in place of ours and labelled as yours, so an auditor can see whose number is whose.
How do you avoid double counting between product footprints and our Scope 3?
They are computed from the same traced orders and the same primary data, which is why they reconcile. Purchased goods and services is built up from the product footprints rather than from a factor applied to spend, and the inventory is reconciled against the product library every reporting cycle.
How is our supply chain data kept confidential?
Supplier relationships are commercially sensitive and are treated that way: we are ISO 27001 certified, suppliers control what each buyer can see, members of a partner programme choose what the programme may see, and unshared data is labelled honestly rather than shown as zero. Worker surveys are anonymous and reported only in group form.