Traceability

Knowing your suppliers is not knowing your chain.

A retailer asks which mill dyed a particular order. The answer exists somewhere (the garment was definitely made by someone, from fabric definitely woven by someone else) but the supplier list stops at the factory that sewed it, and everything behind that is a phone call to someone who may or may not answer.

The short version

Supply chain tiers number the steps between a brand and the origin of its materials: tier 1 assembles the finished product, tier 2 makes the fabric, tier 3 processes the yarn and fibre, and tier 4 is the raw material itself. A traced chain differs from a supplier list in that each link is confirmed by the partner who made it. Green Story builds a trace outward from a purchase order, with each trading partner confirming their own link and naming the next.

The vocabulary

Four tiers between you and the origin.

The tier numbering is simply distance from you, measured in companies rather than in kilometres. It is worth knowing precisely because it is used loosely: a brand saying it has visibility to tier 2 and a retailer asking for tier 2 are not always describing the same boundary, and the mismatch surfaces at the worst possible moment.

In apparel the tiers have fairly stable meanings. Tier 1 cuts and sews. Tier 2 makes the fabric: knitting, weaving, and usually the wet processing that turns greige cloth into something you can sell. Tier 3 is spinning and the processing of fibre into yarn. Tier 4 is the raw material: the farm, the forest, the recycler, the polymer plant.

The impact does not respect this ordering, which is the whole difficulty. Most brands know tier 1 well, because they place orders with it and visit it. Most of the environmental impact sits at tiers 2 and 3, in processes they neither buy directly nor see, which is precisely why a traceability programme that stops where the commercial relationship stops cannot answer an environmental question.

  1. Tier 1

    Cut, make, trim

    The factory that assembles the finished garment. The one you place orders with, audit, and usually can name without looking anything up.

  2. Tier 2

    Fabric and wet processing

    Knitting or weaving, dyeing, printing, finishing. Where most of the energy and water in your product were spent, and typically one company further out than your contract reaches.

  3. Tier 3

    Yarn and fibre processing

    Spinning, ginning, and the processing of raw material into something spinnable. Rarely visible from a brand’s systems at all.

  4. Tier 4

    Raw material

    The farm, the forest, the recycling facility, the polymer plant. Where origin claims are made, and the hardest tier to evidence.

The distinction

A list of names is not a chain.

Almost every brand has a supplier list. Rather fewer have a traced chain, and the gap between the two is not one of completeness. It is one of structure, which is why adding more names to the list never closes it.

A list tells you who you work with. A chain tells you which companies made this particular order, in what sequence, and who says so. The difference shows up the moment a question is specific: a list can tell a retailer that you work with four dye houses; only a chain can tell them which one dyed the fabric in the style they are asking about.

The second difference is attribution, and it matters more than it sounds. On a list, the brand asserts the whole thing, including facts about companies two steps away that it has no direct knowledge of. In a traced chain each partner confirms their own link and names the next one, so nobody speaks for anyone else. That is what makes it hold up under questioning, and it is why a chain assembled by asking tier 1 to fill in a spreadsheet about its own suppliers is a list wearing a chain’s clothes.

Two things that are often called the same thing, and what each can answer.

A supplier list

Names, addresses and certifications, maintained centrally, asserted by you. Covers the companies you have a relationship with, and covers them all equally.

Use it for

Procurement, audit scheduling, and publishing a factory list. Genuinely useful work that is not traceability.

A traced chain

Links per order, each confirmed by the partner who made it, with pending links shown as pending and unconfirmed ones marked unconfirmed.

Use it for

Answering a question about a specific product, attributing a footprint to real facilities, passports, and any origin claim.

The mechanism

Built outward from a purchase order.

A trace starts from something that definitely happened: an order you placed, for a product, with a supplier, on a date. That anchoring is what keeps the exercise honest: it means every link discovered is a link in the chain of a real garment rather than a general statement about sourcing.

From there it moves outward one company at a time. Your tier 1 names who supplied them for that order. That supplier confirms the link and names theirs. Each partner gets their own record and their own login, answers once, and reuses that answer for every buyer who asks, which is the reason they answer properly, and the reason the burden on them falls rather than rises as more of their customers join.

Partners who will never log in are recorded on their behalf by an analyst, and that fact is stamped on the record rather than hidden inside it. And where a link matters or the evidence is thin, verification happens at the facility: our own people, on the ground, checking the record against the floor, which is the step a questionnaire structurally cannot do.

  1. Step

    Raise the trace from an order

    A real purchase order, for a real product. Everything discovered afterwards attaches to something that actually shipped.

  2. Step

    Each partner confirms their own link

    Your tier 1 names who supplied them; that supplier confirms it and names theirs. Nobody speaks for anyone else, which is what makes it hold up.

  3. Step

    Suppliers answer once

    Their own portal, their own record, one queue of requests with deadlines, and they control what each buyer sees.

  4. Step

    Gaps are graded, not hidden

    Critical, important or optional, chased by an analyst. Pending links show as pending and unconfirmed links as unconfirmed, never as zero.

  5. Step

    Verify where it matters

    On-site verification across 35+ manufacturing countries, checking the record against the floor rather than against another form.

The honest answer

No chain is complete on the first pass.

This is the part worth internalising before you start, because it is the part that surprises people: a first trace is always partial. Suppliers are busy, some relationships are brokered through agents who regard the chain behind them as their commercial asset, and some facilities genuinely do not hold the records being asked for.

What separates a useful programme from a demoralising one is how the incomplete parts are represented. A pending link shown as pending is a piece of information: it tells you who to chase and how exposed a claim is. A pending link quietly rendered as zero, or filled with a plausible default, is worse than nothing: it converts a known unknown into an unknown unknown, and it is how brands end up publishing claims they cannot defend.

So the figure worth watching is not how many tiers you can name. It is how much of the chain a supplier has actually put their name to, and whether that share is rising. A brand with 60% of its chain confirmed and the rest honestly marked is in a far stronger position than one with a complete-looking map assembled from assumptions.

The words, gathered

Everything this page defined.

In the order you met them, in case you came back for one of them rather than for the whole page.

Tier 1
The facility that assembles the finished product: cut, make, trim. The one a brand usually contracts with directly.
Tier 2
Fabric production: knitting or weaving, plus the dyeing and finishing that carry most of a garment’s energy and water.
Tier 3
Yarn and fibre processing: spinning, ginning, and the steps that turn raw material into something spinnable.
Tier 4
The raw material itself: farm, forest, recycler or polymer plant. Where origin claims are made and hardest to evidence.
Traced chain
A chain of links per order, each confirmed by the partner who made it, as distinct from a centrally asserted supplier list.
Chain of custody
Evidence that a specific material passed through a specific set of hands: the documentary spine under an origin or content claim.
Graded gap
A missing input recorded and ranked critical, important or optional, rather than defaulted and presented as collected.
If you only wanted one answer

The shorter answers live on the FAQ.

Each of these is answered in a paragraph on the FAQ, which is where those answers live. This page is the long version of the same subject.

What a trace can prove

A traced chain tells you what your partners have confirmed and what our people have verified on the ground. It does not tell you that nothing has gone unreported, and we will not present it as though it does. Where a link is unconfirmed we mark it unconfirmed, and where an agent will not disclose what sits behind them we will tell you that rather than produce a map that looks finished. A chain with honest gaps is worth more than a complete-looking one, because you can act on the first and can only hope about the second.

Bring us your own product

Watch the boundary get drawn on something you made.

Pick one garment and we will walk it end to end with you: the unit, the boundary, what we would need from your chain, and what the result would and would not let you say.