Ecoscore

France put a number on the label.

Since October 2026, selling clothing into France has meant displaying an environmental cost for it. It is the first scheme anywhere to put a single environmental figure in front of a shopper by law, it is computed on a method the state publishes, and the inputs that move it are not always the ones a brand expects.

The short version

The Coût Environnemental is France’s environmental cost display for textiles: a single score, computed on the state’s published Ecobalyse method from a cradle-to-grave product footprint, that has been a condition of selling into the French market since 1 October 2026. Green Story computes it from a brand’s own product data rather than from a category average, publishes it into the Ecobalyse system by API, and puts the same figure on product pages and passports.

The scheme

A number the shopper can see.

Most environmental regulation asks a company to file something. This one asks it to display something, which is a different kind of exposure: the audience is not an assessor who reads a report once, it is every customer standing in front of the product, and a competitor’s team can read it too.

The figure is a cost in impact points, and lower is better. It is computed on a method the French state publishes in the open (Ecobalyse), which means the calculation is inspectable rather than proprietary, and two brands computing honestly on the same product should land in the same place. That openness is the scheme’s strongest feature and the reason it is worth engaging with rather than waiting out.

It is also the leading edge of a pattern rather than a French eccentricity. Italy’s own Ecoscore is set to follow, and the EU’s Product Environmental Footprint method sits underneath the whole family. A brand that gets the underlying product data right for France is substantially ready for what follows; a brand that treats it as a one-country compliance exercise will do the work again.

The method

What the score is actually built from.

The input to the score is a cradle-to-grave product footprint modelled to the rules the scheme actually scores on, not a footprint you already had for something else. That distinction matters more than anything else on this page. A cradle-to-gate figure prepared for a retailer’s questionnaire is not convertible into an environmental cost, because the scheme counts stages that stop at the factory gate excludes.

The model wants the product described physically: what the fibres are and in what proportion, the mass of the garment, where each stage of processing happened, how the fabric was made and finished, how it travelled. Several of those inputs carry more weight than their prominence suggests, and a brand’s first encounter with the method is usually the discovery that a field it treated as administrative is moving the result.

A points total also compresses a whole life cycle into one number, and compression loses things. That is a property of every single-score scheme rather than a flaw in this one, and it is why the footprint behind a score, its measured share and the method version all matter: a score nobody can interrogate is a marketing asset rather than an environmental one.

  1. Moves it

    Material and its origin

    Fibre type and proportion, and the system that produced it. The headline input, and the one most brands look at first, though rarely the only one that matters.

  2. Moves it

    Where the processing happened

    The grid and fuels behind the spinning mill and the dye house. The same garment made in two countries does not score the same, and the gap is not small.

  3. Moves it

    Mass

    Impact scales with how much material is in the product. A heavier garment carries more of everything, which is why the specification sheet is a scoring document.

  4. Moves it

    Wet processing and finishing

    Dyeing, printing and finishing: thermal energy, water and chemistry together. The stage where the word on the invoice tells you least about the impact.

  5. Moves it

    Transport and distribution

    Freight mode over distance. Air against sea is not a marginal difference, and the leg that gets forgotten is usually the last one.

  6. Moves it

    Durability and use

    A cradle-to-grave scheme counts the life the garment is expected to have. How long it lasts and how it is cared for are inside the boundary rather than outside it.

The date

What the rules now require.

Since 1 October 2026, environmental scoring has been a condition of selling into France under the Coût Environnemental scheme. The work it takes sits upstream: the score is a rendering of a product footprint, and a product footprint is a rendering of a supply chain you may not yet be able to describe.

The sequence is the same one every scheme on the timeline wants, which is the argument for doing it once properly. Your products as data. The chain behind them traced far enough back that you can say where the fabric was made and finished. A cradle-to-grave footprint on a defensible method. Then the score, computed and published into Ecobalyse by API so that the figure filed and the figure on your product page are the same number.

The thing worth doing early, and it costs nothing, is finding out where you stand. A score you compute privately in the first half of 2026 is a planning document; the same score discovered in September is a problem. Brands that have looked early have generally found one or two lines carrying the range’s exposure, and that is an actionable finding rather than a crisis.

The honest answer

What actually moves a score you do not like.

The instinct on seeing a poor score is to change the material, and sometimes that is right. Often it is not, because what moves a fibre’s number is usually the farming or recovery system, the yield, the distance and the grid behind the mill rather than the name of the material, which is why fabric league tables disagree with one another so consistently.

The levers that tend to move a real product are less glamorous. The energy behind wet processing, because that is where the heat is. The country a stage happens in, because grids differ by more than most substitutions do. Mass, because impact scales with it and a specification can often lose weight without losing the product. And durability, because a cradle-to-grave method counts the life the garment delivers.

The useful discipline is to test before you commit, which is what the Explorer exists for: answer what a product is made of and how it was made, and watch the figure assemble, so you can see which inputs are carrying it before a tech pack is signed. Guessing at this from a league table is how brands spend a season on a substitution that does not show up in the result.

The wider pattern

Build it once for every scheme.

France is first but it is not going to be alone, and the schemes arriving behind it share an ancestry: the EU’s Product Environmental Footprint method, which prescribes more than ISO does (which impact categories, which datasets, which rules for a given product family) precisely so that two assessments of the same kind of product are comparable.

The practical consequence is that the expensive asset is not the score. It is the underlying product data: a traced chain, a described product, a footprint computed on a method you can name, with the measured share stated. A score is a view of that asset, and so is a passport, and so is a retailer’s questionnaire response, and so is a Scope 3 line.

Which is the case for treating France as the forcing function rather than the goal. A brand that builds the data to answer France well has most of what the passport will ask for. A brand that buys a score for the French SKUs will be starting again when it arrives.

The words, gathered

Everything this page defined.

In the order you met them, in case you came back for one of them rather than for the whole page.

Coût Environnemental
France’s environmental cost display for textiles: a single score in impact points, shown to shoppers, computed on the state’s published method.
Ecobalyse
The French state’s published calculation method and system for the environmental cost. Open, inspectable, and the thing scores are filed into.
PEF
The EU’s Product Environmental Footprint method. Prescribes categories, datasets and product rules so that two assessments can be compared.
Impact points
The unit the French score is expressed in. A compression of many impact categories into one figure, where lower is better.
Single score
Any scheme that reduces a full life cycle to one number. Legible to shoppers, and lossy by construction, which is why the footprint under it has to stay reachable.
If you only wanted one answer

The shorter answers live on the FAQ.

Each of these is answered in a paragraph on the FAQ, which is where those answers live. This page is the long version of the same subject.

What a score can carry

One number cannot describe a garment, and we will not pretend otherwise: a points total compresses a whole life cycle, and compression loses things that matter. What we will do is compute yours from your own products rather than a category average, keep the footprint, the measured share and the method version one click behind the figure, and tell you plainly when a product’s data is too thin for the score to mean much yet. A score nobody can interrogate is a marketing asset rather than an environmental one.

Bring us your own product

Watch the boundary get drawn on something you made.

Pick one garment and we will walk it end to end with you: the unit, the boundary, what we would need from your chain, and what the result would and would not let you say.